Heating Advice
Showing 8 articles in Heating Advice
Heating Upgrades in Acton: A Boiler and Radiator Guide for W3 Homes
Upgrading your heating in Acton? An engineer-led guide to modernising older boilers, radiators, microbore pipework, and smart controls across W3.
Read the guide
Motorised Zone Valve Faults: S-Plan and Y-Plan Troubleshooting in West London
Diagnose S-Plan and Y-Plan motorised zone valve faults with our engineer guide to manual levers, synchronous motors, and microswitch failures in West London homes.
Read the guide
Why Do My Radiators Get Hot When I Run the Hot Water?
Turn on a tap and the radiators warm up too? Here's why combi diverter valves and motorised zone valves cause it, the airing cupboard test to check yours, and when to call a Gas Safe engineer.
Read the guide
The Late Summer 15-Minute Heating Test: Before the October Cold Snap in West London
Central heating sitting dormant all summer causes pumps and valves to seize. Run this simple 15-minute test in August or September to catch faults before the October cold snap.
Read the guide
Chemical Flush vs Powerflush: Why Cheap Flushes Fail on West London Systems
Wondering if a cheap chemical flush will fix your cold radiators? Here is the engineering truth on why chemical flushes fail on heavy sludge and when a powerflush is required.
Read the guide
Heating on but Radiators Cold? Here's Why & How to Fix It
Switched your heating on after summer and radiators stay cold? Here is the exact diagnostic sequence to fix airlocks, stuck TRV pins, and central heating sludge.
Read the guide
How to Bleed a Radiator (Step-by-Step)
Radiator cold at the top? How to bleed it safely in seven steps, which order to do multiple radiators, and what it means if bleeding doesn't fix the cold spots.
Read the guide